Coil Heaters for Hot Runner Nozzles
We build coil heaters to size for hot runner nozzles and for any small cylindrical part where a conventional band will not fit.
- 816 °C / 1500 °F Maximum temperature
- Up to 134 W/in² Watt density
- 220 · 380 · 440 V Standard voltage
- Type J as standard Built-in thermocouple
- Direct manufacturer
- ISO 9001:2015
- Reply in under 2 h
Who builds these coil heaters
Built here, not resold
Omega Heaters de México has spent over 25 years building industrial electric heating elements, and its nozzle coils come out of its own plant in Guadalupe, Nuevo León, Mexico. Direct manufacturer: you quote with the people who build your part.
- Direct manufacturer Our own plant in Guadalupe, Nuevo León, Mexico. We are not distributors.
- Over 25 years Building industrial electric heating elements for industry across northern Mexico.
- ISO 9001:2015 Certified processes and raw materials, audited, with a warranty against manufacturing defects.
- Voltages in stock 220, 380 and 440 V, which is what the American and Chinese machines on the floor run on.
- Wound to your nozzle diameter The coil is wound to size, with the round or flat profile your tip needs.
- Type J thermocouple as standard And type K if your control calls for it, built in at the factory rather than added afterwards.
- Shipping anywhere in Mexico From the plant in Guadalupe, Nuevo León, with the lead time confirmed when we quote.
Technical data
Specifications
- Constructions
- High-performance armored coil and tubular nozzle band
- Maximum temperature
- Up to 816 °C / 1500 °F on the armored coil
- Watt density
- Up to 134 W/in² applied at the nozzle
- Voltage
- 220 · 380 · 440 V, in stock for American and Chinese machines
- Built-in thermocouple
- Type J as standard, type K optional
- Coil inside diameter
- Made to your nozzle diameter
- Profile
- Round or flat; the flat one transfers by contact and performs better
- Contamination resistance
- The tubular band holds up better to plastic spillage
Aplicaciones
- Hot runner nozzles in plastic injection molds.
- Heating jaws and blades on sealing and packaging equipment.
- Small cylindrical parts in laboratory equipment and in measuring and diagnostic instruments.
- Applications where other heater types have failed for lack of space, or because more watt density was needed.
Qué ganas
- High watt density in minimal space — where no conventional band will fit.
- High operating temperature in armored construction: up to 816 °C / 1500 °F.
- Temperature measured at the exact point that matters, with a thermocouple built into the heater body itself.
- It can be cold-formed to the exact shape of your nozzle or part, non-standard geometries included.
EMERGENCY SUPPORT
Nozzle not heating? Send a photo on WhatsApp.
No drawing and no part number needed. From a photo of the burnt-out coil and your nozzle diameter, an engineer will tell you right away whether we can reproduce it — with a built-in type J or K thermocouple — and how long it takes.
1
Send the dimensions of your nozzle or part
diámetro interior, longitud y potencia, aunque no tengas plano.
2
Dinos si necesitas termopar integrado
and which type, J or K.
3
Te recomendamos la construcción
conventional coil or armored micro-tubular, depending on your temperature and your priority.
Te contesta un ingeniero de aplicaciones
Lun–Vie 9:00–17:00 · respuesta < 2 h
Frequently asked questions
What we get asked most
What is the difference between a coil heater and a band heater?
A band heater wraps larger surfaces, like the full barrel of an extruder. A coil heater is meant for small parts and tight spaces — typically hot runner nozzles — where a band will not physically fit.
Do I need a built-in thermocouple?
If temperature stability at the nozzle is critical to the quality of your molded part, yes: the built-in thermocouple reads right where the heat is, not at some point away from the real process. If your process is less sensitive, a coil heater without one, read by an external thermocouple, can be enough and costs less.
Will it work on nozzles that keep getting contaminated by plastic spillage?
If that is your recurring problem, a tubular construction with a resistant sheath — instead of an exposed coil — usually solves it at the root, even though it runs at a lower maximum watt density than an armored micro-tubular.
What is the lead time?
3 to 5 business days on standard builds. These are precision parts, so check availability for rush orders over WhatsApp.
What else is a coil heater called?
It also goes by spiral heater, helical heater, micro-tubular heater and nozzle heater. It is the coiled element that mounts over a hot runner nozzle or any small cylindrical part.
Will it fit my hot runner system?
Yes. We build for nozzles on hot runner systems of any make — Husky, Mold-Masters, Synventive, Incoe, Günther, Thermoplay and the rest — because a coil is not ordered by part number but by the inside diameter of the winding, the heated length, the wattage, the voltage and the type of lead.
I don't have a part number. Can you copy the one I have?
Yes, and that is the most common case. Send a photo of the burnt-out coil, your nozzle diameter and, if it can still be read, the data plate. With that we reproduce it at the same wattage and voltage, with a built-in type J or K thermocouple if yours had one.
How small can the diameter be?
We build for small-diameter nozzles, where a conventional band no longer fits or cannot reach the watt density needed — that is exactly the case a coil is for. Tell us the outside diameter of your nozzle and the length you need heated and we will confirm whether it fits.
CATÁLOGO · MÁS MODELOS
¿Buscas otro diámetro o construcción?
Browse all available coil heater and micro-tubular models.
Explorar catálogo
Quote on WhatsApp