Electric Duct Heaters for HVAC 6-80 kW
We build open coil electric duct heaters for air heating in central air conditioning systems, air handlers, ducts and fan coil units.
- 6 to 80 kW Power
- 127 · 220 · 240 · 440 V Voltage
- Duct, unit-mounted, fan coil, dual outlet Configurations
- 2 to 5 days Lead time
Configure my duct heater
Nationwide shipping
anywhere in Mexico
- Direct manufacturer
- ISO 9001:2015
- Reply in under 2 h
Who builds these duct heaters
Built here, not resold
Omega Heaters de México has spent over 25 years building industrial electric heating elements, and its duct heaters for HVAC come out of its own plant in Guadalupe, Nuevo León, Mexico. Direct manufacturer: the price you see here is the factory price.
- Direct manufacturer Our own plant in Guadalupe, Nuevo León, Mexico. We are not distributors.
- Over 25 years Building industrial electric heating elements for industry across northern Mexico.
- ISO 9001:2015 Certified processes and raw materials, audited, with a warranty against manufacturing defects.
- Dielectric test on every unit Every heater is checked circuit by circuit and given a high-voltage dielectric test against the frame before it leaves the plant.
- Fastest growing in northern Mexico By annual growth in duct heater sales volume across northern Mexico.
- One of the few builders in the country Very few plants in Mexico actually build duct heaters for HVAC.
- 2 to 5 day lead time And 2-day rush orders for line stoppages. Shipping anywhere in Mexico.
- Built to size, no design charge Made to the opening in your equipment and in whatever voltage you have, at the same price.
Technical data
Specifications
- Power
- 6 to 80 kW
- Heat output
- 20,473 to 272,971 BTU/h · 2 to 26.7 tons
- Line current
- 15.7 to 210 A at 220 V three-phase · half that at 440 V
- Heating stages
- 1 to 5, one per 18 kW
- Voltages
- 127 · 220 · 240 · 440 V, same price in any of them
- Configurations
- Duct, unit-mounted, fan coil and dual outlet
- Heating element
- Coiled nickel-chrome wire on ceramic insulators
- Frame
- Galvanized sheet steel, gauge to suit the rating
- Already included
- Thermal cut-out (Klixon) and contactor, factory wired
- Factory-direct price
- $2,506 to $15,400 MXN
- Lead time
- 2 to 5 business days · rush orders in 2
- Shipping
- Anywhere in Mexico
- Certification
- ISO 9001:2015
EMERGENCY SUPPORT
Line down? Send a photo on WhatsApp.
No drawing and no part number needed. From a photo of the burnt-out heater or of the unit nameplate, an engineer will tell you right away the rating and the size you need, and how long it takes. If you already know the rating, build your quote and we will come back with a price.
1
Medida del espacio
What are the dimensions of the duct or the unit where the heater goes? Is it duct-mounted, unit-mounted or something else?
2
Manda foto, planos o la muestra
The easiest thing is to send us a WhatsApp with a photo.
3
Cotiza
A quote from one of our engineers in under 2 hours.
Te contesta un ingeniero de aplicaciones
Lun–Vie 9:00–17:00 · respuesta < 2 h
-
6 kW 2 tonDuctodesde $3,036 Máquinadesde $2,506
-
9 kW 3 tonDuctodesde $3,410 Máquinadesde $2,970
-
10 kW 3.3 tonDuctodesde $3,410 Máquinadesde $3,080
-
12 kW 4 tonDuctodesde $4,296 Máquinadesde $3,300
-
15 kW 5 tonDuctodesde $4,459 Máquinadesde $3,520
-
18 kW 6 tonDuctodesde $4,950 Máquinadesde $4,127
-
20 kW 6.7 tonDuctodesde $5,610 Máquinadesde $4,926
-
22 kW 7.3 tonDuctodesde $5,830 Máquinadesde $5,531
-
24 kW 8 tonDuctodesde $6,820 Máquinadesde $6,160
-
25 kW 8.3 tonDuctodesde $7,370 Máquinadesde $6,769
-
30 kW 10 tonDuctodesde $7,986 Máquinadesde $7,377
-
36 kW 12 tonDuctodesde $8,580 Máquinadesde $8,006
-
40 kW 13.3 tonDuctodesde $9,350 Máquinadesde $8,611
-
45 kW 15 tonDuctodesde $10,615 Máquinadesde $9,544
-
54 kW 18 tonDuctodesde $11,660 Máquinadesde $10,463
-
60 kW 20 tonDuctodesde $12,540 Máquinadesde $11,693
-
72 kW 24 tonDuctodesde $13,864 Máquinadesde $12,624
-
80 kW 26.7 tonDuctodesde $15,400 Máquina—
Frequently asked questions
What we get asked most
What does a duct heater for HVAC cost?
Factory prices run from $2,506 (6 kW unit-mounted) to $15,400 (80 kW duct-mounted) Mexican pesos, and they are published rating by rating in the capacity table on this same page. These are direct-manufacturer prices, not resale, and they already include the thermal cut-out (Klixon) and the contactor. The final price depends on the size of the opening it goes into.
How many kW do I need for my unit?
The market reference is 3 kW per ton of cooling: a 3 ton unit calls for 9 kW, a 5 ton unit for 15 kW and a 10 ton unit for 30 kW. We build 6 to 80 kW from catalog, and ratings outside that range to order. If the unit sits in a building with heavy heat loss, it is worth stepping up one size.
How much current does it draw, and what wire gauge does it need?
At 220 V three-phase it is 2.62 A per kW, and half that at 440 V: a 20 kW heater draws about 52.5 A at 220 V and 26.2 A at 440 V. The capacity table gives the exact amperage for all 18 ratings at both voltages. That is the number used to pick the wire gauge and the breaker.
How many stages does it come with?
One stage per 18 kW, which is how these heaters are normally staged: up to 18 kW one stage, up to 36 kW two, up to 54 kW three, up to 72 kW four. It can be built with a different number if your panel handles it differently — tell us how many and what controls them.
Will it fit a Carrier, Trane, York, Goodman or Lennox unit?
Yes. The heater is built to the opening, not to the brand, so it drops into air handlers and packaged units from any manufacturer. To quote it we only need the model of your unit or the dimensions in inches; send us the model and we will look the dimensions up.
What is the difference between duct-mounted, unit-mounted and fan coil?
The duct-mounted type comes in a galvanized steel frame closed on the sides, to drop into a run of duct. The unit-mounted type comes on a plate, with the element array exposed, and replaces the factory heater inside an air handler or packaged unit. The fan coil and dual outlet versions are size variants for those units. All four use the same heating element.
Do you manufacture or resell?
We manufacture. The plant is in Guadalupe, Nuevo León, and we have spent over 25 years building industrial electric heating elements, with ISO 9001:2015 certified processes and raw materials. Every heater is checked circuit by circuit and given a high-voltage dielectric test against the frame before it leaves the plant. As a direct manufacturer the price is the factory price and the size is matched to your unit at no extra charge.
How soon do you deliver, and do you ship nationwide?
Manufacturing takes 2 to 5 business days, with 2-day rush builds for line stoppages, and we ship anywhere in Mexico. Being the manufacturer, we do not depend on a supplier's stock arriving.
Quote on WhatsApp