Tubular Immersion Heaters
A stainless steel tubular heater for bain-maries and saunas, built to deliver even, safe and efficient heating in commercial and industrial use.
- Up to 40 W/in² Watt density
- Stainless steel, copper, Incoloy or titanium Sheath materials
- Up to 6.10 m / 20 ft Maximum length
- NPT or flange Termination
- Direct manufacturer
- ISO 9001:2015
- Reply in under 2 h
Who builds these tubular heaters
Built here, not resold
Omega Heaters de México has spent over 25 years building industrial electric heating elements, and its immersion tubular heaters come out of its own plant in Guadalupe, Nuevo León, Mexico. Direct manufacturer: you quote with the people who build your part.
- Direct manufacturer Our own plant in Guadalupe, Nuevo León, Mexico. We are not distributors.
- Over 25 years Building industrial electric heating elements for industry across northern Mexico.
- ISO 9001:2015 Certified processes and raw materials, audited, with a warranty against manufacturing defects.
- Four sheath materials 304/316 stainless, copper, Incoloy and titanium come out of the same plant, so our recommendation never depends on stock.
- Bent to your vessel U, W or whatever bend your tank calls for, with an NPT threaded fitting or a flange.
- With thermostat and low-level cutoff So it never fires dry, which is how most of them burn out.
- Shipping anywhere in Mexico From the plant in Guadalupe, Nuevo León, with the lead time confirmed when we quote.
Technical data
Specifications
- 304/316 stainless steel sheath
- The most common, suitable for food contact
- Copper sheath
- More specialized use, good thermal conductivity
- Incoloy or titanium sheath
- For aggressive processes and corrosive liquids
- Watt density in water
- We set it from the volume, the temperature and your water
- Shapes
- U, W, or whatever bend your vessel calls for
- Termination
- Threaded NPT fitting in brass, steel or stainless, or flange
- Accessories
- With or without thermostat, and with low-level protection
- Certification
- ISO 9001:2015
Aplicaciones
- Bain-maries and stainless steel hot tables for food service: steam tables and sandwich warmers in restaurants and industrial kitchens.
- Calentamiento de agua industrial: tanques, calderas, lavadoras.
- Immersion in petroleum-based oils and other process liquids or chemicals.
- Fermentation and pasteurization of organic liquid products (milk and dairy)
- Tubs and surface-treatment tanks with non-corrosive solutions.
Qué ganas
- Even heating of the liquid throughout the whole volume of the tank or vessel.
- Longer service life when the sheath material is chosen correctly.
- A drop-in replacement for existing heaters in hot tables and tubs.
- Designed for your heating process: hot table, water heating, oil, chemicals or anything else.
CONSTRUCCIÓN Y MATERIALES
¿Cómo fabricamos nuestras resistencias tubulares?
Designed for direct immersion in liquids: water, oil and process solutions. It is the heater behind your bain-marie, your stainless steel hot table and your industrial water tanks. Built to the exact size, shape and wattage your process needs.
Description
A tubular heater is a nickel-chrome heating tube whose surface is ready to be submerged in the liquid it will heat: water, oil, chemical solutions or anything else.
Certificados
Our processes and raw materials are certified to ISO 9001:2015, which guarantees a standard of quality. We offer a warranty against manufacturing defects.
Control de calidad
Every tubular heater is given a high-voltage dielectric test to verify its electrical insulation before it leaves the plant, making sure no current can leak into the liquid it touches.
Tiempo de entrega
Omega Heaters de México has the fastest lead time on the market: 3 to 4 business days. We also run 2-day rush builds for line stoppages, or for food service equipment that cannot stop.
EMERGENCY SUPPORT
Tubular heater burnt out? Send a photo on WhatsApp.
No drawing and no part number needed. From a photo of the heater and the dimensions of the vessel, an engineer will tell you right away whether we can reproduce it in stainless steel at the same wattage and voltage, and how long it takes.
1
Describe your liquid and temperature
What are you heating (water, oil, food), to what temperature, and what is the volume of the tank or vessel?
2
Manda foto, medidas o la muestra
Aunque no tengas plano ni número de parte.
3
We advise you on the wiring
We advise you free of charge on wiring your heater to the power supply.
Te contesta un ingeniero de aplicaciones
Lun–Vie 9:00–17:00 · respuesta < 2 h
CATÁLOGO • MÁS MODELOS
¿Buscas otra variante de este producto?
Browse all models and sizes. And if it is not listed, we build it to size.
Ver todos los modelos
CATÁLOGO
Desliza para ver más →
Frequently asked questions
What we get asked most
Do you build for bain-marie units or hot food tables?
Yes, from a single piece. Send us a photo with the dimensions of your heater, the wattage or how many liters of water it will heat, and the voltage you will connect it to.
Can I use it to heat oil?
Yes — petroleum-based oils and sugar syrups, for example. But the watt density changes a great deal compared with water. Without the right calculation, a crust forms on the heater surface that cuts heat transfer and makes it fail within hours. Tell us the type of oil and our engineering department will recommend the correct wattage and configuration.
Will it work with hard water, heavy mineral content or chemicals?
Hard water and chemical solutions accelerate wear on standard stainless steel heaters through scaling. Depending on the application we may recommend an Incoloy sheath, a Teflon coating, or a different type of heater altogether, such as a titanium cartridge.
How do I wire my heater to my thermostat, pilot light or controller?
Get in touch and we will advise you on the electrical connection at no charge. Tell us at the time of purchase if you need the thermostat, the temperature controller, a pilot light or any other accessory and we will send you the wiring diagram. Do not void your warranty — ask us first.
What is the lead time?
3 to 5 business days on standard builds. We run 1 to 2 day rush builds for restaurants, industrial kitchens or process lines that cannot stop. Ask about availability over WhatsApp.
What else is a tubular heater called?
It also goes by tube heater, immersion tubular heater, U or W element after its bent shape, and hot table heater. It is a stainless steel tube element bent to the shape of your vessel.
What equipment do you build them for?
Serving-line bain-maries, hot food tables, saunas, steamers, hot water tanks, parts washers and jacketed kettles. We build to the shape of the vessel, in U, W or whatever bend your equipment calls for, with brass fittings and flanges or plugs depending on how it mounts.
I don't have a part number. Can you copy the one I have?
Yes, and that is the normal way to order. Send a photo of the burnt-out heater — straight on, so we can see the bend — and the dimensions of the vessel, plus whatever the data plate still says. With that we reproduce it at the same wattage, voltage and shape.
What wattage and voltage should I ask for?
The wattage comes out of how many liters you are heating, what temperature you need and how fast you want to get there, plus what is lost through the walls of the vessel, which depends on whether it is insulated and whether it has a lid. We build in 120, 220 and 240 V. Give us the liters and the time and we will send the wattage already worked out, at no charge.
Quote on WhatsApp