Industrial Thermocouples to Size
We build thermocouple temperature probes to suit your process: with connection head, protective thermowell, and threaded or flanged mounting.
- J and K Types available
- Up to 1260 °C / 2300 °F on type K Measuring range
- 304/316 stainless steel Sheath
- NPT, flange or clamp Process connection
- Direct manufacturer
- ISO 9001:2015
- Reply in under 2 h
Who builds these thermocouples
Built here, not resold
Omega Heaters de México has spent over 25 years building industrial electric heating elements and instrumentation, and its thermocouples come out of its own plant in Guadalupe, Nuevo León, Mexico. Direct manufacturer: you quote with the people who build your sensor.
- Direct manufacturer Our own plant in Guadalupe, Nuevo León, Mexico. We are not distributors.
- Over 25 years Building industrial electric heating elements for industry across northern Mexico.
- ISO 9001:2015 Certified processes and raw materials, audited, with a warranty against manufacturing defects.
- To the length and connection you ask for NPT thread, flange or sanitary tri-clamp, with a connection head, without one, or with the cable already integrated.
- 304/316 stainless sheath And a threaded, flanged or clamp thermowell to suit the pressure and the environment of your process.
- Grounded, ungrounded or exposed junction We tell you which one you need depending on whether you want fast response or electrical isolation.
- With the wire and the panel Thermocouple, extension wire and control come out of the same plant, so the loop arrives complete.
Technical data
Specifications
- Types available
- J and K, others to specification
- Range
- Up to 1260 °C / 2300 °F on type K
- Junction type
- Grounded, ungrounded or exposed
- Process connection
- NPT thread, flange or sanitary tri-clamp
- Sheath
- 304/316 stainless steel
- Thermowell
- Threaded, flanged or clamp, to suit pressure and environment
- Connection head
- With or without head, or with integral cable to the length you ask for
- Certification
- ISO 9001:2015
Aplicaciones
- Instrumentation on water, oil and other process fluid piping.
- Measurement in industrial tanks, boilers and furnaces.
- Temperature monitoring on pillow blocks and rotating bearings, to catch failures caused by a lack of lubrication.
- Casting processes for aluminum and other non-ferrous metals.
- Hydrocarbon and flammable gas industries, with a flanged thermowell, the safest connection for that kind of process.
- Surface temperature measurement on molds, plates and piping.
Qué ganas
- A complete sensor ready to install, not just the wire: sheath, process connection and, where needed, thermowell, all built together.
- The junction type — grounded, ungrounded or exposed — chosen from the real electrical conditions in your plant, which avoids erratic readings caused by interference.
- Longer life and greater safety with a thermowell in high-pressure processes or with hazardous fluids, because the sensor can be changed without opening the process.
- Compatible with your existing control panels — see Temperature Control Panels.
EMERGENCY SUPPORT
Thermocouple reading wrong? Send a photo on WhatsApp.
No drawing and no part number needed. From a photo of the probe and how it is mounted, an engineer will tell you right away whether the problem is the thermocouple, the thermowell or the wire, whether we can reproduce it exactly — type J or K, threaded or flanged — and how long it takes.
1
Tell us your thermocouple type and process temperature
J, K, u otro si ya lo tienes definido.
2
Cuéntanos tu conexión a proceso
NPT thread, flange or clamp, and whether your application needs a thermowell.
3
We recommend the right
junction type and sheath length for your installation.
Te contesta un ingeniero de aplicaciones
Lun–Vie 9:00–17:00 · respuesta < 2 h
CATÁLOGO · MÁS MODELOS
¿Buscas otra variante de este producto?
Browse all available thermocouple and temperature probe models.
Explorar catálogo
Frequently asked questions
What we get asked most
What is the difference between this page and your thermocouple wire pages?
This page is about the complete sensor — sheath, process connection and, where needed, thermowell. The Type J and Type K thermocouple wire pages are about the wire that connects that sensor to your control instrument. They are normally quoted together.
Do I need a thermowell?
If your process runs under pressure, carries an abrasive or corrosive fluid, or you want to be able to change the sensor without stopping the process, yes. For water or low-pressure air it often is not necessary. Tell us about your process and we will confirm.
Which junction type should I choose?
Grounded if you need the fastest possible response and your electrical environment is clean. Ungrounded if you have large motors, variable frequency drives or another source of interference nearby. Exposed only for measuring air or gas at ambient pressure, never for immersion or pressurized processes.
Which process connection do I need: NPT, flange or clamp?
Threaded NPT is the most common for water lines and general fluids. A flange is recommended for hydrocarbons and flammable gases, for safety. A sanitary tri-clamp is the standard in the food and pharmaceutical industries.
What is the lead time?
3 to 5 business days depending on the connection type — ones that include a flanged thermowell can take longer. Ask about availability over WhatsApp.
What else is an industrial thermocouple called?
It also goes by temperature probe, temperature sensor, thermocouple probe and contact pyrometer. Here we mean the complete part — junction, sheath, thermowell and connection head — not just the wire.
Type J or type K, which one do I need?
Type J, iron-constantan, covers −40 to 750 °C / −40 to 1382 °F and is the standard in plastics, injection and extrusion. Type K, chromel-alumel, covers 0 to 1260 °C / 32 to 2300 °F and is the most used across industry in general: furnaces, heat treatment and high temperature. If your controller is already configured for one of them, stay with it: changing type without changing the configuration gives false readings.
What color is each type?
In the ANSI code, type J is white on the positive leg and red on the negative, with a brown overall jacket; type K is yellow on the positive and red on the negative, with a yellow jacket. Red on the negative is common to both, so it is the positive leg that tells you the type. If your wire follows the IEC code the colors are different — send us a photo and we will confirm it.
My thermocouple reads wrong or jumps around. Is it the sensor?
Not always. The three causes we see most are: the extension wire is not the same type as the thermocouple — running ordinary copper somewhere along the way is the classic mistake and puts error into the whole reading; the junction has been contaminated or has oxidized inside the thermowell; or the junction is not touching the bottom of the thermowell and is reading air. Send a photo of the installation and we will tell you which of the three it is before you buy a new part.
Quote on WhatsApp