Banda de Mica

Mica Band Heaters Built to Size

We build mica band heaters to the barrel of your extruder or injection machine.

  • Up to 650 °C / 1202 °F Maximum temperature
  • Up to 25 W/in² Watt density
  • Stainless or carbon steel Sheath
  • Made to your barrel Manufacturing
  • Direct manufacturer
  • ISO 9001:2015
  • Reply in under 2 h
Who builds these band heaters

Built here, not resold

Omega Heaters de México has spent over 25 years building industrial electric heating elements, and its band heaters come out of its own plant in Guadalupe, Nuevo León, Mexico. Direct manufacturer: you quote with the people who build your part, not with a middleman.

ISO 9001:2015 ISO 9001:2015Certified processes and raw materials
  • Direct manufacturer Our own plant in Guadalupe, Nuevo León, Mexico. We are not distributors.
  • Over 25 years Building industrial electric heating elements for industry across northern Mexico.
  • ISO 9001:2015 Certified processes and raw materials, audited, with a warranty against manufacturing defects.
  • Dielectric test on every band Every band is measured to confirm its wattage and given a high-voltage dielectric test against the sheath before it leaves the plant.
  • All five constructions in house Mica, ceramic, high-density tubular, cast aluminum and nozzle band come out of the same plant, so our recommendation never depends on what we happen to have in stock.
  • Replaced without a part number Send a photo of the burnt-out band and your barrel diameter and we reproduce it at the same wattage and voltage. If the nameplate is gone, we calculate it.
  • 2 to 5 day lead time And 2-day rush orders for a stopped machine. Shipping anywhere in Mexico.
  • Built to your barrel, no design charge Diameter, width, voltage, lead type and whatever holes your part needs, at the same price.
EMERGENCY SUPPORT

Mica band burnt out and the machine stopped? Send a photo on WhatsApp.

No drawing and no part number needed. From a photo of the burnt-out band and your barrel diameter, an engineer will tell you right away whether we can reproduce it in mica at the same wattage and how soon it reaches your plant. If your process now asks for more temperature, we will tell you whether ceramic is the better call.
1

Manda el diámetro del cañón o la banda actual

Diámetro interior, ancho y voltaje. Si no los tienes, una foto de la banda quemada basta para empezar.
2

Cuéntanos tu prioridad

Menor costo inicial, ahorro energético o resistencia a la contaminación por derrame de plástico.
3

Te confirmamos si la mica te alcanza

Un ingeniero te dice si va mica, o si tu temperatura ya pide cerámica, y con qué armadura.

Te contesta un ingeniero de aplicaciones

Lun–Vie 9:00–17:00 · respuesta < 2 h
ESPECIFICACIONES TÉCNICAS

Especificaciones técnicas

Se fabrica a la medida del cañón de tu máquina. Mándanos los datos o una foto de tu banda actual y te confirmamos la medida antes de producir.
Parámetro
Rango
Aislamiento
Lámina de mica con el alambre NiCr bobinado encima
Temperatura máxima
Hasta 650 °C sobre la armadura
Densidad de potencia
Hasta 25 W/in² (3.9 W/cm²)
Armadura
Acero inoxidable o acero al carbón
Diámetro interior
1" a 12" o más (25 a 305 mm)
Ancho de la banda
1" a 6", o el de tu zona de calentamiento
Voltaje
120 · 220 · 240 · 480 V, mono o trifásico
Sujeción
Abrazadera de banda, barreno de apriete o fleje
Salida eléctrica
Terminales, cable con malla, caja de conexión o conector rápido
Barrenos y recortes
Para termopar, boquilla, tornillería o sensor, sin cargo
Fabricación
2 a 5 días hábiles · urgencias en 2
Envíos
Toda la República, desde Guadalupe, Nuevo León
Frequently asked questions

What we get asked most

What else is a mica band heater called?
It also goes by mica band, mica clamp heater and mica barrel heater. In Spanish-language industrial directories it appears as resistencia tipo mica, and it is the same part.
How hot will mica take?
Up to 650 °C / 1202 °F measured on the sheath. If your process asks for more, the natural step up is the ceramic band, which reaches 875 °C / 1607 °F. Tell us which resin you run and at what temperature and we will tell you whether mica is enough.
Mica or ceramic for my job?
Mica if up-front cost is what rules and your process does not demand extreme energy savings. Ceramic if you run continuously: it cuts power draw by up to 35 % and pays itself back on the electricity bill. If you are not sure, tell us your operating hours and your kWh rate and we will work it out.
I don't have a part number. Can you copy the one I have?
Yes, and that is how most orders reach us. Send a photo of the burnt-out band and your barrel diameter. With that we reproduce it in mica at the same wattage and voltage; if the data plate is gone, we calculate it from the dimensions and your resin temperature.

The companion to your band heaters

The band heats the barrel. The jacket keeps that heat from walking away.

An insulation jacket — also called a barrel blanket or removable insulation — straps over the band heaters with a strap and buckle, no tools needed. The heat that today escapes into your plant stays in the barrel: your bands stop running flat out all shift and burn out less often.

It is built to your barrel, just like the band, and comes off and back on every time the machine is serviced.

25 a 40 %
Less power draw on the heated zone, which is what is typically reported
49 °C
Or less on the outer face: safe-to-touch surface, OSHA reference
1 inch
Typical thickness; we build it thinner or thicker to suit your machine
Cubierta térmica instalada sobre las resistencias tipo banda del cañón de una máquina de inyección
La funda va encima de las bandas, no en lugar de ellas.
Quote on WhatsApp