Banda de Cerámica

Ceramic Band Heaters

We build ceramic band heaters to the barrel of your extruder or injection machine.

  • Up to 875 °C / 1607 °F Maximum temperature
  • Up to 35 % Energy savings
  • Up to 39 W/in² Watt density
  • Made to your barrel Manufacturing
  • Direct manufacturer
  • ISO 9001:2015
  • Reply in under 2 h
Who builds these band heaters

Built here, not resold

Omega Heaters de México has spent over 25 years building industrial electric heating elements, and its band heaters come out of its own plant in Guadalupe, Nuevo León, Mexico. Direct manufacturer: you quote with the people who build your part, not with a middleman.

ISO 9001:2015 ISO 9001:2015Certified processes and raw materials
  • Direct manufacturer Our own plant in Guadalupe, Nuevo León, Mexico. We are not distributors.
  • Over 25 years Building industrial electric heating elements for industry across northern Mexico.
  • ISO 9001:2015 Certified processes and raw materials, audited, with a warranty against manufacturing defects.
  • Dielectric test on every band Every band is measured to confirm its wattage and given a high-voltage dielectric test against the sheath before it leaves the plant.
  • All five constructions in house Mica, ceramic, high-density tubular, cast aluminum and nozzle band come out of the same plant, so our recommendation never depends on what we happen to have in stock.
  • Replaced without a part number Send a photo of the burnt-out band and your barrel diameter and we reproduce it at the same wattage and voltage. If the nameplate is gone, we calculate it.
  • 2 to 5 day lead time And 2-day rush orders for a stopped machine. Shipping anywhere in Mexico.
  • Built to your barrel, no design charge Diameter, width, voltage, lead type and whatever holes your part needs, at the same price.
EMERGENCY SUPPORT

Ceramic band burnt out and the machine stopped? Send a photo on WhatsApp.

No drawing and no part number needed. From a photo of the burnt-out band and your barrel diameter, an engineer will tell you right away whether we can reproduce it in ceramic at the same wattage and how soon it reaches your plant. If you run mica today, we will tell you how much your power draw would drop by switching.
1

Manda el diámetro del cañón o la banda actual

Diámetro interior, ancho y voltaje. Si no los tienes, una foto de la banda quemada basta para empezar.
2

Dinos cuántos turnos corres

El ahorro de la cerámica se nota en operación continua. Con tus horas y tu tarifa te sacamos la cuenta.
3

Te decimos cuánto bajarías de consumo

Un ingeniero te confirma la construcción, la potencia y la salida eléctrica que le toca a tu cañón.

Te contesta un ingeniero de aplicaciones

Lun–Vie 9:00–17:00 · respuesta < 2 h
ESPECIFICACIONES TÉCNICAS

Especificaciones técnicas

Se fabrica a la medida del cañón de tu máquina. Mándanos los datos o una foto de tu banda actual y te confirmamos la medida antes de producir.
Parámetro
Rango
Aislamiento
Núcleo cerámico con alambre NiCr, fibra de mayor espesor
Temperatura máxima
Hasta 875 °C sobre la armadura
Densidad de potencia
Hasta 39 W/in² (6 W/cm²)
Ahorro de energía
Hasta 35 % menos que una mica equivalente
Armadura
Acero inoxidable
Diámetro interior
1" a 12" o más (25 a 305 mm)
Ancho de la banda
1" a 6", o el de tu zona de calentamiento
Voltaje
120 · 220 · 240 · 480 V, mono o trifásico
Sujeción
Abrazadera de banda, barreno de apriete o fleje
Salida eléctrica
Terminales, cable con malla, caja de conexión o conector rápido
Barrenos y recortes
Para termopar, boquilla, tornillería o sensor, sin cargo
Fabricación
2 a 5 días hábiles · urgencias en 2
Envíos
Toda la República, desde Guadalupe, Nuevo León
Frequently asked questions

What we get asked most

What else is a ceramic band heater called?
It also goes by ceramic knuckle heater and ceramic core band heater. Careful: it is not the same as a ceramic infrared heater, which heats from a distance and does not clamp around the barrel.
Where does the energy saving come from?
From the insulation. The ceramic fiber is thicker than a mica sheet, so less heat escapes into the air of your plant and the heater works less of the time to hold the same temperature. The saving shows up in continuous operation; on a machine that starts and stops, far less so.
How long does it take to pay back the difference over mica?
It depends on your operating hours and your electricity rate. Tell us how many zones your barrel has, how many shifts you run and your cost per kWh, and we will do the math before you buy. It is not a calculation you should have to do yourself.
I don't have a part number. Can you copy the one I have?
Yes, and that is how most orders reach us. Send a photo of the burnt-out band and your barrel diameter. We reproduce it in ceramic at the same wattage and voltage; and if you run mica today, we will tell you how much your power draw would drop by switching.

The companion to your band heaters

The band heats the barrel. The jacket keeps that heat from walking away.

An insulation jacket — also called a barrel blanket or removable insulation — straps over the band heaters with a strap and buckle, no tools needed. The heat that today escapes into your plant stays in the barrel: your bands stop running flat out all shift and burn out less often.

It is built to your barrel, just like the band, and comes off and back on every time the machine is serviced.

25 a 40 %
Less power draw on the heated zone, which is what is typically reported
49 °C
Or less on the outer face: safe-to-touch surface, OSHA reference
1 inch
Typical thickness; we build it thinner or thicker to suit your machine
Cubierta térmica instalada sobre las resistencias tipo banda del cañón de una máquina de inyección
La funda va encima de las bandas, no en lugar de ellas.
Quote on WhatsApp